Advanced plastic, U3Print

U3 NYLON 6C ALL in 0 carbon-Filled nylon U3 NYLON 6C ALL IN 0 is distinguished by the following features: - its operating Temperature. When testing this composite for thermal stability using our technology, which consists in holding a printed "bone" with a load suspended from it 500 g. in a vacuum oven with an increasing temperature, we reached the mark of 205 °C during the day, adding several degrees, after which our equipment refused to warm up more, and the tested product did not show slack, but remained in the same position as it was. - Mechanical properties. The modulus of elasticity at tension is 3 GPA. Before that, our strongest material was considered U3 NYLON 6C M4 V.3 with a modulus of elasticity of 2 GPA. The impact strength is 22 kJ / m2 versus 17 kJ/m2 for the "competitor". - Conductivity. When measuring the resistance, the tester showed a little more than 1000 Ohms. - During the tear tests, we encountered the following problem: the bone slipped out of the clamp, even with very strong twisting.